Custom Pattern Heat Transfer Vinyl

** EasyPatterns now require the use of our TTD High Tack Mask sold separately**


All the Variety Without the Extra Work!
The pressure sensitive carrier allows for quick and simple weeding and releases easily with a hot peel after application. With a semi gloss finish and soft hand, Custom Patterns are the star of the show even when applied with a home iron!


EasyPatterns Apply to:

100% cotton
Poly/cotton blends
100% polyester
Leather
Lycra®/spandex


CUTTER SETTINGS: Cricut:

Blade: Standard
Setting: Iron On

Silhouette Cameo:

Blade: Standard, 3
Material: Heat Transfer, Smooth
Speed: 8
Force: 6

Scan N Cut:

Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 1

Roland GS/GX-24:

Blade: 45°
Gram Force: 80-90
Offset: .250
Speed: 25-50 cm/s

Graphtec:

Blade: 45°
Gram Force: 9
Tool: CB09U 0
Speed: 25 cm/s

MH, SC2, LP3, and Titan 1:

Blade: 45°/60°
Gram Force: 80-85
Speed: 300mm/s
*Blade Advancing Varies

Titan 2 & 3:

Blade: 45°/60°
Gram Force: 60-65
Speed: 300mm/s
*Blade Advancing Varies


Visit our Facebook Page at: Vinyl and Tulle Supply

If you have any questions, call our customer service line at: 352-366-8840

Application instructions (home iron)

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier hot or cold Application Instructions (heat press)

• Cut material – don’t mirror!
• Weed excess material
• Mask with TTD High Tack Mask
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 10-15 seconds
• Peel carrier hot or cold
• Cover and reheat for 2-3 seconds